Specs
All Eagle Floats™ outer shells are manufactured to the following standards from 100% Virgin LLDE filled with Virgin 1pcf Expanded Polystyrene molded in place.
Specifications
Properties
Malt Index(3)
Density
Bent Strip ESCR(4)
Flexural Modulus(5)
Tensile Yield Strength(6)
Tensile Yield Elongation(6)
Tensile Ultimate Strength(6)
Tensile Ultimate Elongation(6)
Melting Point
Heat Distortion Temp
66 psi (4.64kg/cm2)
264 psi (18.56kg/cm2)
Vicant Melting Point
Hardness, Shore D
ARM Low Temp Impact(7)
0.250" (6.35 mm)
ARM Low Temp Impact(7)
0.125" (3.17mm)
ASTM(1)
D-1238
D-792
D-1693
D-790
D-638
D-638
D-638
D-638
E-794
D-648
D-648
D-1525
D-2240
ARM Method
ARM Method
”Typical
(1) Properties designated have been determined using methods which are in accordance with or substantially in accordance with specified testing standards.
(2) Typical values represent average laboratory values as guides only, not as specifications
(3) Condition 190ºC / 2.16 kg
(4) Condition, 100% lgepal
(5) 1% Strain Value
(6) TypeIV specimen, 2″ (50.8 mm) per minute test speed, 0.075″ (1.9 mm) thickness
(7) -40ºC